Mounting Frame
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. MF692MS
Rev 2016-04-19 14:39
5
3.) Mount the Frame to the Wall
Using the 4 fastening holes (A) (Ø8.5), secure the frame to the wall.
See extra mounting support for additional fastening.
* Screws are not provided in product delivery.
4.) Extra Mounting Support
If extra support is needed, the frame can be fastened to the floor.
The Mounting Frame comes with 2 steel support bars (B) (one on
each side of the frame) to be kept in place if not mounting to the
floor. If floor mounting is required, remove the steel support bars by
removing the 2 screws (A) on each side and secure the frame to the
floor surface using the bolt holes (C).
Please note: Ensure water barrier regulations are adhered to.
* Screws are not provided in product delivery.
5.) Fastening Bolts
Affix the toilets fastening bolts to the frame according to the toilet
type.
(A) 59M Toilet
(B) Charm / Jade Wall Toilet
(C) Pearl Toilet
6.) Mount the Cover, w/Cut Out
A - Pearl Seat & Cover (to be drilled Ø10)
B - Pearl Toilet (pre-drilled)
C - 59M Toilet (to be drilled Ø13)
D - Charm / Jade Wall Toilets (to be drilled Ø13)
According to toilet type, the height of the Cover, w/Cut Out
④
may
need to be adjusted. Cut on the line shown for the following toilet
type:
E - Pearl
F - 59M
G - Charm / Jade Wall / 50M - no cutting needed, leave at full length
