Mounting Frame
Tel. +47 70 03 91 00
www.jetsgroup.com
Product No. MF692MS
Rev 2016-04-19 14:39
4
Pre-Installation
IMPORTANT INFORMATION:
The mounting frame is designed to be used with a range of toilet models. The dimension information for each suitable model varies. Verify
dimensions for correct adjustment of height, bolts and connections depending on the toilet model, prior to installation. If unclear, contact Jets
Vacuum AS or your nearest supplier before starting the installation.
● All dimensions are in mm.
● Height dimensions are from the finished floor surface (after tiles or other finished floor materials have been installed).
● Drawings are schematics only.
Installation
Please read the instructions carefully and familiarize yourself with the required regulations, tools, materials, and installation sequences.
● Observe all local and industry plumbing and building codes. The bracket is to be installed in compliance with all local, state and federal wet
room requirements.
● Installation is to occur within the water barrier in line with local/industry requirements.
● Ensure that the water supply is closed during pipe installation.
Installation Steps
1.) Adjust the Clamp Bracket
Toilet Type:
Pearl
Toilet Type:
Jade Wall
59M
50M
Charm
Adjust the clamp bracket according to the toilet type.
The clamp bracket (A) can be removed by unscrewing the 2 screws (B). Use the appropriate screw holes (B) or (C) depending on toilet type.
2.) Adjust the Height of the Frame
Open the 4 screws on the bottom bracket (A) and adjust the height according to toilet type (use a level).
Tighten the screws at the correct height.
Refer to the Label located on the upper right hand corner of the mounting frame for the correct height.
