10
seconds until the water projects from the nozzle and the string floss begins pulsating from the capsule. Once done, turn off the unit by
pressing the On/Off button again.
Using.
If you have never used a water irrigator before, it is recommended to start at a lower setting by adjusting the pressure adjust button to
the I position. You can gradually increase the pressure provided you don’t experience any gum bleeding or discomfort.
To begin, lean over the sink, place the nozzle into your mouth, position the tip towards your teeth and press the On/Off button. Direct
the jet stream onto your gum-line as illustrated and move from one tooth to another. Slightly close your lips to avoid splashing but
allow water to flow freely from your mouth to the sink. For best results, pause briefly between teeth to let the floss fully clean the area.
Continue until all areas around and between the teeth have been reached.
It is recommended
that you replace the
floss capsule each week to get the best cleaning
results under the gum-line,
behind any braces and
between the teeth.
Pressure setting
On/off button