2.
ܝ㑪ප䗷
(JetNet 3008f) :
ᇛܝ㑪㎮ϔッ䗷
JetNet 3008f
ܝ㑪පˈϔッ䗷䳔ܹⱘܝ
㑪ප䀁٭ˈབϟ೪᠔⼎DŽ䤃䁸ⱘ䗷㎮᳗ᇢ㟈ܝ㑪ප⛵⊩ᎹDŽ
Korenix
ଂᕠ᳡ࢭ
KoreCARE
ᰃᚴ䗮⾥ᡔܼ⧗ᅶ᠊᳡ࢭЁᖗˈ䊛⏅ᡔ㸧Ҏવ䱼ᰖ⚎ᙼᦤկᇜὁⱘᡔ㸧ᬃᣕDŽ
Korenix
ᚴ䗮ܼ⧗ଂᕠ᳡ࢭЁᖗ䳏ᄤ䛉ӊΉ
DIP
ℶ᩹䭟䮰䀁ᅮ
Ǽ
䗭ᰃϔℒ
Class 1
䨇ᇘ
/LED
⫶કDŽ
ߛ࣓Ⳉ㽪䨇ᇘܝᴳDŽ
⊼ᛣ
RX
TX
RX
TX
Cable Wiring(SC to SC)
RX A TX B
TX A RX B
P1 to P8
(Pin1 ~ 8)
P9
Pin No. #
⢔ᜟ
ᦣ䗄
ON
ଳࢩ䁆ッষⱘᮋ㎮ฅ䄺ࡳ㛑
ON
ଳࢩᮋ䳏ฅ䄺ࡳ㛑
Off
䮰䭝䁆ッষⱘᮋ㎮ฅ䄺ࡳ㛑
Off
䮰䭝ᮋ䳏ฅ䄺ࡳ㛑
JetNet 3008/3008f Industrial Ethernet Switch, conforming IEEE 802.3 and 802.3u standard,
supports 8 10/100Base TX (JetNet 3008) or 6 10/100TX plus two 100FX Fast Ethernet fiber
ports in either multi-mode type (JetNet 3008f-m) or single-mode type (JetNet 3008f-s).
The JetNet3008/3008f adopts rugged metal case design to operate in harsh environments
(-25
o
C~70
o
C); It also provides IP-30 standard protection. It features one relay output to alarm
users if a port link fails or with the power fails. Alarms can be enabled/disabled by a 9-pin dip
switch. JetNet 3008/3008f is recommended to be powered by DC 24V with 12~48V range
from the 6-pin removable terminal block.
Introduction
Box contents
�
JetNet 3008/3008f Switch
�
Quick Installation Guide
�
CD User Manual
Mounting the Unit
�
Din-Rail mount: Mount the din-rail clip
screwed on the rear of JetNet 3008/3008f on the DIN rail.
About the DIN Rail installation, please refer
user’s manual.
Grounding JetNet 3008 / 3008f Switch
There is one grounding screw on the bottom side
of JetNet 3008/3008f. Connect the earth ground
screw of switch to the grounding surface to ensure
safety and prevent noise. See, Figure-1
Package contents Check List
PW1
Alm
PW2
Alarm Control
port 1~8
power
Earth Ground
Screw
Earth Ground
Warning: Do not connect to AC line-Natural
Figure-1