GLOBAL JET CLUB EUROPE – FINAL-Modellbau
email: [email protected]
email: [email protected]
www.final-modellbau.de
______________________________________________________________________________
Page
6 of 8
Manual - JETLEGEND
Central controller
Date: July 6
th
, 2015
9.
Switch button
a.
ON/OFF (Power Switch): Long press this button to turn on the power. Caution: even
if power is turned off, LED is still on which indicates battery is connected in this
controller. Make sure always disconnect the battery after a flying day; otherwise
battery will be exhausted by this control unit!
b.
Manual button
B-1 Long press this button to retract the gear. Note, this function doesn’t work
when transmitter is on.
B-2 Short press this button to turn on or turn off F/S. When it’s turned on, F/S’s LED
is green and height is displayed in screen. E.g. when it reads 002, height is 2 meters.
Press again to turn off this function. Screen reads “OFF”.
c.
Setup button
Short press this button, screen displays PSI, V and RPM circularly. And
corresponding LED of each function is on.
C-1 Long press this button when PSI is displayed to enter pressure loosing
protection setup. Increase 10PSI by each press, max. is 60PSI. Circulate the setup.
C-2 Long press this button when V is displayed to enter gear door time-lapse setup.
Increase 1 second by each press, max is 15s. Circulate the setup.
C-3 Long press this button when RPM is displayed to enter height (F/S) setup. Min. is
002 which means 2 meters, max is 010 which means 10 meters. Circulate the setup.
Long press to exit or automatically exit in 5 seconds.
