JETI model MEZON 90, Руководство пользователя

Страница: 9 / 34

EN
4) Insert the soldering iron tip into the
cavity of the connector to be soldered and
slowly add solder. Let it flow into the
cavity. Only fill the cavity so far (not all the
way full) so that when you insert of the
tinned cable end, no solder overflows. If
you are going to solder the special “Jeti
AntiSpark” connectors, insert a male half
into the female half of the “Jeti AntiSpark”
connector when you soldier a cable to the
female connector. In this case, the male
plug will dissipate heat during soldering
and ensure that the parts already
soldered to the female will not melt.
5) Keep holding the soldering iron tip in
the connector cavity and at the same time
insert the tinned cable end. The cable is
heated by the molten solder in the
connector. The soldering iron tip can now
slowly be removed from the cavity as the
cable end is inserted.
6) The soldered connectors should be
insulated with shrink tubing.
8