JETI model MEZON 90, Руководство пользователя

Страница: 20 / 34

EN
Acumulator type – Here is where you select your flight battery type:
NiCd/NiMh – the cut-off voltage can be set according to your desired minimum single
cell voltage.
LiIon/LiPol – Here you can either allow your Mezon to automatically detect the number
of cells (this is useful if you are using packs with different cell counts), or you can specify
the number of cells. For LiFe packs we do not recommend the automatic cell selection,
instead, you should specify the number of cells. The last setup choice within this cell type
is the setting for the minimum voltage per cell.
Direct – Here you can simply enter a cut-off voltage directly without selecting any
battery type.
Alarm voltage – Here is where you set the alarm level where the low voltage alarm is
activated.
Temp. Protection – This is for the set-up of any temperature protection. If the ESC
temperature exceeds the selected temperature protection value, the selected motor cut-
off starts and the high temperature alarm is activated. The temperature alarm starts
signaling when the ESC temperature is 10 degrees below the selected temperature
protection value.
Max. bat. Capac. – Setting for the maximum flight battery capacity usage. If the
capacity used exceeds the selected value, the selected motor cut-off starts. It is possible to
select NO LIMIT in this menu.
Capacity alarm - Setting for the alarm activation level if battery capacity usage is
exceeded.
Max. batt Current – Setting for the current protection. If the actual current draw exceeds
the selected current value, the Mezon actively limits the current draw and the high
current alarm is activated .
Cutoff type – Motor power limiting mode.
19