JETI model MEZON 115 opto, Руководство пользователя

Страница: 27 / 34

EN
6. MEZON Controller Firmware Update
MEZON Controllers allow firmware updates via a PC. The update is performed using the
JETI USB-Adapter. The procedure is as shown below.
On the manufacturer internet pages, under “Downloads”, you will find an update program
with the most recent firmware. Download to your PC. Connect the USB Adapter to the PC.
The USB-adapter driver installation instructions are contained in the USB-adapter
instruction booklet.
Start the firmware update program on your PC.
Connect the three wire cable with the red connector from the MEZON controller to the
USB-adapter. As long as the controller is connected to the USB-adapter, obey the
following rules:
Never connect the three wire cable with the black connector.
For the BEC equipped controllers do not connect any batteries. The BEC equipped MEZON
controllers get their power through the USB-adapter.
However, when updating the firmware of the OPTO controllers, the controller must be
connected to a separate power supply with a voltage of at least 5,6V, (2 cells LiXX or 4 x
NiXX).
26