JETI model DUPLEX DC-24, Руководство пользователя, Страница: 116 / 168

computer radio control system EN
9.3.10 Voice Commands
The Voice commands function has been built in to provide a basic
voice recognition capability so that the pilot can control some
aspects of a model by voice. The voice recognition algorithm doesn’t
contain any predefined language specifications, so you need to
teach it to respond correctly to several phrases of your interest. The
transmitter uses speaker-dependent recognition algorithms and
with the highest accuracy will respond correctly to the same voice as
it has been trained. The DC/DS-24 features the voice-activity
detection system (VAD), which is able to detect the presence of
voiced speech in sound samples.
The Voice Commands are still considered experimental
feature. Please do not use this function to control any aspects
of your model that could a cause crash if the command is not
detected properly or another command is erroneously
recognized. Warning
Lef
t
RightGround Mic.
control position (Center-Beep mode), but voice announcements of
the current position is also available (Voice mode).
• Center-Beep Mode – The transmitter beeps whenever the
control goes to a central position (its deflection is thus 0%).
• Voice Mode – The transmitter will vocally announce the
numeric value of the current position of the control. The value is
reported after every change of the control position and only after
the movement is stopped. In this mode, you can also select an audio
file that will alert you when changes in control positions are
detected.
Example: If you generate the “CONTROL.WAV” file and then assign
it as the File parameter, the transmitter announces eg “Control:
twenty-five”.
The setting is always valid for the current model.
You can create up to 15 different voice commands (plus a keyphrase)
that are shared between all models. For each model separately it is
possible to specify which commands are active. You can use the
voice commands as a standard control device in the Input selection
dialogue, for example to activate voice telemetry announcements,
play audio files or to switch auxiliary model functions.
It is possible to use the internal microphone or a microphone
connected externally via the 4-pin headphone jack connector. A
standard cellphone headset (Apple or Samsung compatible) should
be used.
4. 4.
114