Jetcom CCTV SS-HDR-8704, Руководство пользователя

Страница: 16 / 51

3. Trouble shooting
2.5 Remote control operation
1. Installing the remote control
2. Using the remote control
Network Digital Video Recorder Operation Manual ( V1.0 )
Open the battery cover, install two batteries (Type No.7), make sure positive and negative
poles are right, then close the battery cover.
Before using it, please confirm that batteries have been installed correctly.When using it,
please aim IR TX (transmitter) of the remote control at IR reception of the DVR.Then the IR
light in the front panel is on and the icon on the to p-right of the m onitor screen t urns to blue
" " The DVR can be controlled by the remote control.
Note: If you don't want to use the remote control, you could set in the system setup menu.
Set the item REMOTE ID as OFF. Then the IR Receiver light in the front panel will be
off and the operation of the remote control is invalid.
If the DVR can not be controlled by the remote control, please check the following aspects:
1 Check the positive and negative poles of the batteries.
2 Check the electric quantity of the batteries.
3 Check that whether Remote Sensor are blocked or not.
4 Whether Fluorescent lamps are being used or not nearby.
15