Packing List
Below is the list of items supplied with the Engine or Eurus HVLS ceiling fan. Note
sizes of bolts may vary slightly on different models.
Item
Description
QTY
1
Down rod
3
2
Fan Blades (With Wingtips)
5
3
Threaded Rods
2
4
Fan Controller
1
5
Motor
1
6
Mounting Plate
2
7
Shims
2
8
Clamping Plates
2
9
Top Mounting Plate (for Square Beam)
1
10
Bottom Cover
1
11
Blade Retainers
5
12
Guy Wire
40m
Hardware:
Item
Description
QTY
13
M16 X 55mm: Nuts, Bolts, Flat & Lock Washers
6
14
M16: Nuts, Flat & Lock Washers
16
15
M16 X 140mm: Nuts, Bolts, Flat & Lock Washers
12
16
M16 X 25mm: Bolts, Flat & Lock Washers
4
17
M12 X 85mm: Nuts, Bolts, Flat & Lock Washers
7
18
M12 X 70mm: Nuts, Bolts, Flat & Lock Washers
7
19
M4 X 8mm Screw
3
20
Fan Controller Hardware Set
1
21
Turnbuckles
4
23
Hose clamps
20
Equipment & Tools needed
Equipment:
Scissor Lift or other lifting equipment with a flat base of minimum 1.2m wide and
minimum lift capacity for 1 P additional 115KG.
NOTE:
a.
Use of lift equipment must be in accordance with the safety instructions
prescribed by the lift equipment manufacture, local and national safety
codes that may be applicable at the location of install.
b.
It is recommended that a work zone be clearly marked below the fan
installation location by use of safety cones and warning tape to alert
persons entering the zone to be vigilant and cautious of potential
accidental falling items or risk of lift equipment injury.
