V1.5 ©2009 JetAir Technologies, LLC
- 11 -
8.
Tighten end bolt on Air Knife or JetBlast™ and lock into 15º position.
9.
Attach Flexible Hose with Hose Clamp to Air Knife or JetBlast™ Inlet. Run hose
to Blower or manifold, avoid tight bends and minimize hose length as much as
possible. Trim and attach to blower outlet with hose clamp. Note: hose
lengths longer than 10’ should be “hard” piped with SS Tube or PVC Pipe to
minimize line friction.
Manifolds/Dividers:
Multi-Y Divider – Aero High-Flow Poly Design-
Ø3/Ø4” Inlet x (2) Ø2/3/4” Outlets:
p/n 21600
Multi-Tri Divider – Aero High-Flow Poly Design
Ø3/Ø4” Inlet x (2) Ø2/3” + Ø2/3/4” Outlets
p/n 21601
Multi-Quad Divider – Aero High-Flow Poly
Ø3/Ø4” Inlet x (4) Ø2/3” Outlets
p/n 21602
15º
Line Direction
JetSet™ Mounting
Shown without Premier™
or JetTunnel™ System.
