6
17. Slowly move the carriage back until the
clamp rod is through the hole in the clamp.
Note:
If the clamp rod is not low enough, use
shims, and adjust accordingly.
18. Install the washer and nut (D, Figure 8).
Tighten all bolts.
19. Completely oil the taper attachment to
protect the metal.
20. Install the top shield with six hex socket
screws (Figure 9).
Note:
The cover shield may need to have
notches cut to allow enough room for the
mounting bolts and pins.
Figure 9
Replacement Parts
To order parts or reach our service department, call 1-800-274-6848 Monday through Friday, 8:00 a.m. to
5:00 p.m. CST. Having the Model Number and Serial Number of your machine available when you call
will allow us to serve you quickly and accurately.
