Overall (LxWxH)
1854 x 1334 x 508 mm
Net weight
170 kg
Mains
1~230V, PE, 50Hz
Output power
1,1 kW (1,5 HP) S1
Reference current
8 A
Extension cord (H07RN-F):
3x1,5mm²
Installation fuse protection
16A
Isolation class
I
4.3 Noise emission
Acoustic pressure level (EN ISO 11202):
Idling
LpA 72,5 dB(A)
In operation
LpA 78,4 dB(A)
The specified values are emission levels and are not
necessarily to be seen as safe operating levels.
As workplace conditions vary, this information is intended to
allow the user to make a better estimation of the hazards and
risks involved only.
4.4 Content of delivery
Lathe bed with headstock, tool support and tailstock
– A
350mm Tool rest
– B
Legs
– C
Spur center
– D
Live center
– E
Live cone center
– F
Live cone center pin
– G
Knockout rod
– H
75mm Faceplate
– J (installed on lathe)
Tool rest extension
– K
Faceplate wrench
– L
Levelers
– M
Tool shelf
– N
Hardware:
8
Socket hd. cap screws, 5/16x1-1/4
– HP1*
8
Lock washers, 5/16
– HP2*
8
Flat washers, 5/16
– HP3*
2
Socket hd. cap screws, 3/8x1-1/4
– HP4
2
Lock washers, 3/8
– HP5
* included in JWL1440-HP1, hardware package
Fig 2
5. Transport and start up
5.1 Transport and installation
The machine is designed to operate in closed rooms and
must be placed stable on firm and levelled ground.
The machine can be bolted down if required.
For packing reasons the machine is not completely
assembled
5.2 Assembly
If you notice transport damage while unpacking, notify your
supplier immediately. Do not operate the machine!
Dispose of the packing in an environmentally friendly manner.
Clean all rust protected surfaces with a mild solvent.
Attach the leg stand:
At this point the headstock, tailstock and tool rest should be
removed.
Unscrew the stud (N, Fig 4) from each end of bed.
Fig 4
