Jet JWBS-16, Руководство пользователя

Страница: 7 / 30

7
Contents of Shipping Container
1. Bandsaw
1. Table
1. Owner’s Manual
1. Warranty Card
2. Cast Feet
4 Hex Cap Bolts 3/8”-16x4”
4. Flat Washers 3/8”
4. Lock Washers3/8”
4. Flat Washers 3/8” (plastic)
1. Accessory Package Contains:
2.
Knobs
1. Hex Wrench
1. Handle
1. 10/12mm Wrench
Unpacking
1. Remove the packing material from the
bandsaw.
2. Move the saw to its permanent working
location.
The site should be dry, well lit,
and have enough room to handle long stock
and the service and/or adjustment of the
machine from any side.
3. Have another person help you remove the
bandsaw from the box.
4. Clean all rust protected surfaces with a mild
solvent or diesel fuel and a soft cloth.
Do
not use lacquer thinner, paint thinner, or
gasoline.
These will damage painted
surfaces.
Tools Included for Assembly
1. 10/12mm Open End Wrench
1. Hex Wrench
Tools Required for Assembly &
Adjustments
2. 14mm Open End Wrench
1. Combination Square
1. Cross Point Screw Driver
(shown with optional accessory rip fence, rails
and resaw attachment 708747 and miter gauge
708716)