Keep all table surfaces clean, in particular remove resin
residue.
All anti-kickback fingers must automatically return to their
rest position (downwards)
Never reach with your hands into the machine when guiding
or sorting the workpiece.
Use a feeding aid (push wood) if you want to feed short
stock into the machine.
Thicknessing stock must have a minimum length of 160mm.
Do not thickness more than two work pieces at the same
time.
To plane stock which surfaces are not parallel, use suitable
feeding aids (make fitting templates).
Do not stand on the machine.
Connection and repair work on the electrical installation may
be carried out by a qualified electrician only.
Make all machine adjustments or maintenance with the
machine unplugged from the power source.
Have a damaged or worn cord replaced immediately.
3.3 Remaining hazards
When using the machine according to regulations some
remaining hazards may still exist
Touching the cutter block in the machining area can cause
injury. For effective protection the cutter block guard must
always be adapted to the work piece.
Risk of kickback. Work piece is caught by the rotating cutter
block and thrown back to the operator.
Drawing-in/trapping hazard by power feed mechanism.
Squeezing hazard by workpiece power-outfeed.
Thrown workpiece parts can lead to injury
Sawdust and noise can be health hazards. Be sure to wear
personal protection gear such as safety goggles and ear
protection. Use a suitable dust exhaust system.
The use of incorrect mains supply or a damaged power cord
can lead to injuries caused by electricity.
4. Machine specifications
4.1 Technical data
JPT-8B-M
Planing
Jointing width
max 200 mm
Table length
740mm
Height above table
350mm
Fence size
540x105mm
Fence tilt
0 - 45°
Depth of cut
max.3 mm
Thicknessing
Thicknessing width
max 200 mm
Thicknessing height
5 - 120 mm
Thicknessing table length
270 mm
Min. length of work piece
160mm
Feed speed
6 m/min
Depth of cut
max. 2 mm
Number of knives
2
No load speed n
o
9000 rpm
Cuts per minute
18000
Cutter knife length
205 mm
Cutter knife thickness
1.5 mm
Dust port diameter
Ø100mm
Overall (LxWxH)
780X440X550mm
Net Weight
28 kg
Mains
1~230V, PE, 50-60 Hz
Motor power (input)
1500W
Reference current
6.8 A
Extension cord
H05W-F 3G1mm²
Installation fuse protection
16A
Isolation class
I
JPT-10B-M
Planing
Jointing width
max 254 mm
Table length
920mm
Height above floor
960mm
Fence size
635x130mm
Fence tilt
0 - 45°
Depth of cut
max. 3 mm
Thicknessing
Thicknessing width
max 254 mm
Thicknessing height
5 - 120 mm
Thicknessing table length
305mm
Min. length of work piece
160mm
Feed speed
6 m/min
Depth of cut
max. 2 mm
Number of knives
2
No load speed n
o
9000 rpm
Cuts per minute
18000
Cutter knife length
260 mm
Cutter knife thickness
1.5 mm
Dust port diameter
Ø64(Ø57)mm & Ø100mm
Overall (LxWxH)
980x470x1120mm
Net Weight
34 kg
Mains
1~230V, PE, 50-60 Hz
Motor power (input)
1500W
Reference current
6.8 A
Extension cord
H05W-F 3G1mm²
Installation fuse protection
16A
Isolation class
I
4.2 Noise emission
(Inspection tolerance 4 dB). Work piece pinewood 100mm:
