Jet JOSS-S, Инструкция по эксплуатации и каталог запасных частей

Страница: 14 / 24

14
11.0 Troubleshooting JOSS-S Spindle Sander
Symptom Possible Cause Correction
Sander will not start. Sander unplugged from wall or motor. Check all plug connections.
Fuse blown, or circuit breaker tripped
in service panel. Replace fuse, or reset circuit breaker.
Cord damaged. Replace cord.
Starting capacitor bad. Replace starting capacitor.
Sanding drum does not
come up to speed. Extension cord too light or too long. Replace with adequate size and length
cord.
Low current. Contact a qualified electrician.
Machine vibrates
excessively. Stand or base on uneven surface. Adjust stand or base so that it rests evenly
on the floor.
Bearings worn. Replace bearings.
Sanded edge not
square. Table not square to sanding drum. Use a square to adjust table to sanding
drum.
Sanding marks on
wood. Wrong grit sanding sleeve. Use coarser grit for stock removal and fine
grit for finish sanding.
Feed pressure too great. Do not force workpiece against spindle or
drum.
Table 3
12.0 Replacement Parts
Replacement parts are listed on the following pages. To order parts or reach our service department, call 1-800-
274-6848 Monday through Friday, 8:00 a.m. to 5:00 p.m. CST. Having the Model Number and Serial Number of
your machine available when you call will allow us to serve you quickly and accurately.