Jet JBM-5, Инструкция по эксплуатации и каталог запасных частей

Страница: 7 / 11

5
On-Off Switch
The switch (A, Fig. 5) has a switch key that,
when pulled out, allows the switch to be locked
in the off position.
Handle Adjustment
The handle can be adjusted for leverage and
comfort. Pulling the spring loaded handle
(A, Fig.6) away from the head and turning
allows you to change the position of the handle.
Fence Adjustment
The fence can be moved in and out by loosening the
locking handle (B, Fig.4) on the column.
Hold Down Adjustment
The hold down (C, Fig.4) should be adjusted so it just
touches the top of the workpiece and allows the
workpiece to slide left or right. The hold down can
also be taken off and turned over for a thicker
workpiece. To adjust the hold down, loosen the
locking handle (D, Fig.4).
Depth Stop Rod Adjustment
The depth stop rod (B, Fig. 5) is provided to limit the
depth of the chisel cut. Adjust the depth stop rod
using the locking handle (C, Fig.5). Lower the head
until the bottom of the chisel is at the required depth.
Lower the depth stop rod until it is at rest against the
base.
180
°
Head Rotation
Removing the three hex socket cap screws at the
base will enable you to rotate the head and
column 180
°
. Doing this will let the user mortise
taller items.
Chuck Key Holder
The chuck key holder is located on the left side of
the head.