11
Lubrication
For long life and trouble free operation, it is
essential that this machine is kept well
lubricated. The vice and leadscrew should be
oiled daily. Pivot joints and bearings should be
greased weekly and the hydraulic fluid [-SX]
should be changed annually.
Recommended lubricants
Grease fittings
Texaco Starplex 2 or equivalent
Hydraulic fluid [-SX]
Texaco Rando HDZ22 or Spindura 22
Vice and Leadscrew
Regal R & O 68
Air Prep Unit
The
Air Prep Unit
regulates the air pressure
supplied to the saw. It is located in the cabinet
stand and is accessible through the access door
located below and to the left of the
control panel
.
Referring to Figures 14 and 15, it consists of a
pressure regulator
,
pressure gauge
, and
water
trap
. Air pressure (90lbs. minimum) is supplied
to the
air intake valve
located near the bottom of
the cabinet on the left side. The
pressure
regulator
should be adjusted to 90–120lbs.
Air Prep Unit
Referring to Figure 14:
Required Maintenance
Check weekly.
Drain water from the trap when the level
exceeds the redline.
Figure 14
Содержание J-CK350-2
