10
Operating Controls
Manual Speed Control
(Models J-
2221VS and J-2223VS)
Refer to Figure 4.
Spindle Selector Switch
A three-position selector switch is provided at
the left side of the drill head. It is used to select
spindle rotation: reverse (REV), off (OFF), and
forward (FWD).
Speed Control Hand Wheel
To avoid damage to the
speed adjustment mechanism, the drive
motor must be operating before attempting
to adjust the speed setting.
A speed control hand wheel is provided on the
left front of the head (Figure 4). The handle is
turned clockwise to increase spindle speed and
counterclockwise to reduce speed. To set the
speed, the speed control handle is turned until
the pointer on the front panel is at the desired
speed.
Speed Indicator
An LED spindle speed indicator is provided on
the front panel. The LED indicates speeds from
300 to 2000 rpm.
A selector switch is provided at the left side of
the drill head. The two-position switch is used to
start and stop the drive motor.
Figure 4
Control Panel (Manual Speed Control)
Inverter Speed Control
(Models J-
2232AC and J-2234AC)
Speed Shift Lever
To avoid damage to the
speed adjustment mechanism, the drive
motor must be operating before attempting
to adjust the speed setting.
A speed shift lever is on the right side of the
head
(refer to Figure 2 for location)
. The handle
is turned clockwise to increase spindle speed
and counterclockwise to reduce speed.
Front Panel
The front panel (Figure 5) is mounted on the
front of the drill head. The panel contains all the
controls required to operate the drill press.
There are additional controls on the inverter
mounted on the left side of the drill head. The
inverter is pre-programmed at the factory and
the settings are not to be changed!
Figure 5
Control Panel (Inverter Control)
Inverter On Indicator
The INVERTER ON light indicates that the
inverter is powered up.
Spindle On Pushbutton Switch
The SPINDLE ON pushbutton is used to start
the drive motor. To stop the motor, the
pushbutton is pressed (the switch toggles on
and off).
Содержание J-2221VS
Страница 28: ...28 Wiring Diagram Models J 2221VS and J 2223VS ...
Страница 29: ...29 Wiring Diagram Models J 2232AC and J 2234AC ...
Страница 30: ...30 NOTES ...
Страница 31: ...31 ...
