Jet J-1230R, Инструкция по эксплуатации и каталог запасных частей

Страница: 26 / 48

26
12.0 Maintenance
Regularly scheduled maintenance is crucial to ensure a long service life for your machine. The schedule below shows
general cleaning, lubrication points and coolant replacement information for the J-1230R Radial Arm Drill Press. Item
numbers are located in figures 17-21. Using proper eye protection, clean parts using a metal brush and a rag dipped
with oil (Mobil Vactra AA or equivalent).
Push stop button and power off before lubricating. Follow local
regulations for disposal of used coolant/lubricants.
12.1 General Cleaning
No. Item Action Interval Lubricant
1 Column Clean and lightly wipe with oil
Daily Mobil Vactra oil AA
2 Arm Rail Clean and lightly wipe with oil
Daily Mobil Vactra oil AA
3 Spindle Clean and lightly wipe with oil
Daily Mobil Vactra oil AA
4 Box Table Clean and lightly wipe with oil
Daily Mobil Vactra oil AA
5 Base Remove shavings; clean and wipe with oil
Daily Mobil Vactra oil AA
6 Ball Screw Clean with metal brush and oiled rag
Weekly Mobilux Grease No. 3
7 Counterweight guide rails Clean and wipe with oil
Daily Daily
8 Spindle motor Blow dust from fan housing with compressed air Periodically --
Table 5
12.2 Lubrication
No. Item Location Action Interval Lubricant *
9 Oil Cup (for
arm/column
contact)
Top and bottom
of arm base at
column Add lubricant to full capacity Daily Mobil Vactra oil AA
10 Oil Cup (for
spnidle)
Top of drill head Add lubricant to full capacity Daily Mobil Vactra oil AA
11 Oil Cups - 2 (for
head/arm
contact)
Right side of drill
head Add lubricant to full capacity Daily Mobil Vactra oil AA
12 Arm Raising
Worm Gear
Rear of column Top off at fill hole (12a). Fill to sight
glass full level (12b). Check sight
glass daily Mobil Vactra oil AA
Replace annually; drain at (12c). Use
sight glass to fill to capacity.
Capacity
= 2 liters (1/2 gal.)
Once per year
13 Counterweight
Chain
Behind drill
head Wipe with oiled rag Weekly Mobil Vactra oil AA
14 Coolant Reservoir in
base
Monitor for cleanliness and efficiency.
Replace when dirty or when cutting
becomes inefficient.
Capacity = 30
liters (8 gal.)
Frequent
inspection; top
off as needed Use high quality coolant
of choice
15 Grease nipple
(for spindle)
On spindle Lubricate with lube gun Daily Mobilux Grease No. 3
16 Rack On arm Lubricate with lube gun Every 3 days Mobil Vactra oil AA
17 Oil Cups - 2 (for
clamping)
Rear of column Add lubricant to capacity Daily Mobil Vactra oil AA
18 Gearbox Top and right
side of drill head Top off at fill hole (18a). Fill to sight
glass full level (18b). Check sight
glass daily Mobil Vactra oil AA
Replace annually; drain at (18c). Use
sight glass (18b) to fill to capacity.
NOTE: Put pipe thread compound on
drain plug before re-installing.
Capacity: 4.5 Liters (1.2 gal.)
Once per year
Table 6
* IMPORTANT: If switching brands of lubricants, prevent compatibility issues by thoroughly draining and, if possible,
cleaning the reservoir before filling with the replacement brand.