Jet DSAN4-1, Инструкция по эксплуатации и каталог запасных частей, Страница: 5 / 20

5
4.0 Specifications for DSAN4-series Abrasive Notchers
Table 1
Model number
756180 756185
Stock number DSAN4-1 DSAN4-3
Motor and Electricals
Motor type Non-totally-enclosed, fan-cooled, AC induction
Horsepower 4 HP (3.0 kW)
Motor Phase 1 3
Motor Voltage 230V 230/460V (prewired 230V)
1
Cycle 60 Hz
Listed FLA (full load amps) 16 A
10.5/5.5 A
Starting amps
58 A 46/23 A
Running amps (no load)
6.34 A 3.46/2.81 A
Start capacitor
300
μ
F 300VAC
n/a
Run capacitor 60
μ
F 450VAC
n/a
Motor speed 3400 RPM
Power transfer Direct drive
Power cord
SJT 3x3.31mm
2
12AWG 300V,
L: 3000mm (10 ft.)
SJT 4x2.08mm
2
14AWG 600V,
L: 3000mm (10 ft.)
Power plug Not included
Recommended circuit size
2
25 A 15 A
Sound emission without load
3
85 dB at 1.5m from machine
Capacities
Belt speed 115.6 fps
Belt direction Fwd and Rev
Pipe notching capacity, OD 1/2 to 2-1/2 in.
Notching angle 30 deg. to 90 deg.
Main materials
Belts provided Zirconium, closed coat, 36/60/80G
Main body, column and base Sheet metal
Dimensions
Belt size 79 x 4 in. (2000 x 100 mm)
Standard rolls 1/2, 3/4, 1, 1-1/4, 1-1/2, 2, 2-1/2 in.; L=5-3/4 in. (145 mm)
Working height 43-3/8 in. (1100 mm)
Drive wheel diameter 7-11/16 in. (195 mm)
Dust ports (2) 3 in. OD
Footprint/Base dimensions LxW 20 x 27-7/8 in. (508 x 710 mm)
Overall assembled LxWxH 48 x 24 x 47 in. (1200 x 600 x 1180 mm)
Shipping dimensions LxWxH 56 x 33-1/2 x 57-1/2 in. (1420 x 850 x 1460 mm)
Weights
Net weight 344 lbs (155 kg)
Shipping weight 510 lbs (230 kg)
1
conversion to 460-volt requires additional purchase and installation of DSAN4-3-128-460, Thermal Relay.
2
subject to local and national electrical codes.
3
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As workplace
conditions vary, this information is intended to allow the user to make a better estimation of the hazards and risks
involved only.
L = length, W = width, H = height OD = outside diameter n/a = not applicable fps = feet per second
The specifications in this manual were current at time of publication, but because of our policy of continuous
improvement, JET reserves the right to change specifications at any time and without prior notice, without incurring
obligations.