JET Model 952 UV Disinfection
Device Installation Instructions
COMPONENTS
The following components are supplied in
the disinfection system:
1. Control Panel
2. 4” ABS riser pipe
3. UV Housing with 4” ABS cap, 4” ABS
pipe, 4” double sanitary tee, spacer
insert and keyway
4. UV Insert with top and bottom
plates, H-Chanel risers, quartz
tube and lifting handle
5. UV lamp - 37 Watts
The following components should be
supplied by the installer:
1. All-Purpose Cement
2. Clear Cleaner for plastics
3. Drill with Universal Bit
4. Clean soft cloth
5. Isopropyl alcohol
6. Small slotted screwdriver
7. Wire strippers
8. Phillips Screwdriver
9. Water tight conduit connectors
10. Conduit and Wiring
WARNING: Exposure to UV light
is harmful. Immediate or prolonged
exposure to UV light can result in
painful eye injury, skin burn, premature
skin aging, or skin cancer. Do not
remove an active UV lamp from the UV
housing or attempt to activate lamps
which are not installed within the UV
housing.
