Jet 710701K, Оригинальное руководство пользователя

Страница: 11 / 24

11
Filter Bag Kit Assembly
If you purchased Model DC-1200VX-BK1 or DC-1200VX-
BK3 Dust Collector, this section describes the assembly
and installation of the contents of the 30 Micron Filter Bag
Kit (SN 708636F). These instructions also apply to the
optional 5 Micron Filter Bag Kit (SN 708636MF).
Filter Bag Installation
Referring to Figure 8:
1. Place the hanger (A) on the hanger bracket (B).
2. Slide the filter bag loop (C) over the hanger hook.
3. Feed the retainer strap (D) through the loops on the
filter bag (E) and fasten to the collector housing (F).
Collector Bag Installation
Referring to Figure 9:
4. Insert the ring of the collector bag (A) at an angle into
the housing (B) through the opening at the bottom.
Pull down on the bag to make sure it “seats” in the
housing.
5. Position the plastic window in front so that you can
easily see when the collector bag is full.
After completing the filter bag and collector bag
installation, proceed to
Electrical Connections .
Figure 8
Figure 9