Jet 710701K, Оригинальное руководство пользователя

Страница: 10 / 24

10
6. Install the housing (A, Fig. 5) to two support legs (B,
Fig. 5) using four M8 x 16 hex cap bolts, eight M8 flat
washers, and four M8 hex nuts (C, Fig. 5).
Be sure
hose opening faces fan housing.
Note: For models DC-1200VX-BK1 or DC-
1200VX-BK3 only – Before attaching third support
bracket, place the
hanger bracket (D, Fig.5)
between the support bracket and the housing.
7. Tighten all nuts and bolts at this time with a 13mm
wrench.
Cone Assembly
Referring to Figure 6:
8. Mount the cone support bracket (E) to the housing
with four M6x12 hex cap screws (F), and tighten from
beneath with four M6 hex nuts (G).
9. Install the cone (H) from beneath using the M8x16
hex cap screw (J), M8 flat washer (K), and M8 hex
nut (L), and tighten.
Hose
Referring to Figure 7:
10. Attach the hose (B) between the fan housing (A) and
the impeller housing (D) with two clamps (C).
Tighten the clamps to secure the hose.
This completes the Base Unit assembly. If you purchased
the DC-1200VX-BK1 or DC-1200VX-BK3 Dust Collector
(filter bag version), continue on the following page. If you
purchased the
DC-1200VX-CK1 or DC-1200VX-CK3
Dust Collector (canister filter version), proceed to
Canister Kit Assembly section on page 12.
Figure 5
Figure 6
Figure 7