6
Unpacking
Open shipping cartons and check that all parts are
intact. Report any damage immediately to your
distributor. Read the instruction manual thoroughly
for assembly, alignment, and maintenance
instructions.
Contents of the Shipping Containers
Box One:
1 XACTA Fence II
1 Lock Lever Knob
Box Two:
1 Front Rail
1 Back Rail
1 Guide Tube
3 Black Plastic End Caps
1 Hardware Bag containing:
000
14 ea 1/4-20 x 1-1/2 Hex Cap Screws
0000
7 ea 1/4-20 x 3/4 Hex Cap Screws
000
35 ea 1/4 Flat Washers
000
21 ea 1/4 Lock Washers
000
14 ea 1/4 Hex Nuts
Notes:
The hardware should be packed in the
guide rail along with the end caps.
The contents of the hardware bag (shown at right)
are drawn full scale.
Note 1:
Quantities for items in the hardware bag
are for the 52" rail system. If you purchased the
30" rail system, there will be extra hardware.
Note 2:
If the optional wooden extension table is
not used, there will be extra hardware.
Tools Required for Assembly &
Adjustment
1 #3 Cross Point Screwdriver
2 10mm Open End Wrenches
1 Combination Square & Straight Edge
1 Electric Drill
1 1/4”, 3/16, 5/16”
Drill Bits
2 4”-6” C-Clamps
1 5mm, 6mm Hex Wrenches
Contents of Hardware Bag
