Jet 708599, Инструкция по эксплуатации и каталог запасных частей

Страница: 5 / 28

5
26. Maintain tools with care. Keep tools sharp and clean for the best and safest performance. Follow
instructions for lubricating the tool and changing accessories.
27. Support the workpiece adequately; maintain control of the work at all times.
28. Avoid kickback by sanding in accordance with directional arrows. When disc sanding, sand on the
downward side of the disc; sanding on the upward side can cause the workpiece to fly up causing injury.
29. Sand with the grain of the wood.
30. Do not sand workpieces that are too small to be safely supported.
31. When sanding a large workpiece, use a support table to help stabilize it.
32. Turn off the machine and disconnect from power before cleaning. Use a brush or compressed air to
remove chips or debris — do not use your hands.
33. Do not stand on the machine. Serious injury could occur if the machine tips over.
34. Never leave the machine running unattended. Turn the power off and do not leave the machine until it
comes to a complete stop.
35. Remove loose items and unnecessary work pieces from the area before starting the machine.
Familiarize yourself with the following safety notices used in this manual:
This means that if precautions are not heeded, it may result in minor injury and/or possible
machine damage.
This means that if precautions are not heeded, it may result in serious or even fatal injury.
- - SAVE THESE INSTRUCTIONS - -
Introduction
This manual is provided by JET covering the safe operation and maintenance procedures for a JET Model
JSG-6DC Belt/Disc Sander. This manual contains instructions on installation, safety precautions, general
operating procedures, maintenance instructions and parts breakdown. This machine has been designed and
constructed to provide consistent, long-term operation if used in accordance with instructions set forth in this
manual. If there are any questions or comments, please contact either your local supplier or JET. JET can also
be reached at our web site: www.jettools.com.
WARNING: Drilling, sawing, sanding or machining wood products generates wood dust and other
substances known to the State of California to cause cancer. Avoid inhaling dust generated from wood
products or use a dust mask or other safeguards for personal protection.
Wood products emit chemicals known to the State of California to cause birth defects or other reproductive
harm. For more information go to http://www.p65warnings.ca.gov/wood.
WARNING: This product can expose you to chemicals including lead which is known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to
http://www.p65warnings.ca.gov.