Jet 708599, Инструкция по эксплуатации и каталог запасных частей

Страница: 10 / 28

10
Unpacking
Open shipping carton(s) and check for shipping
damage. Report any damage immediately to your
distributor and shipping agent. Do not discard any
shipping material until the Sander is assembled
and running properly.
Compare the contents of your carton(s) with the
following parts list to make sure all parts are intact.
Missing parts, if any, should be reported to your
distributor. Read the instruction manual thoroughly
for assembly, maintenance and safety instructions.
Contents of Main Carton
See Figure 8.
1 Belt/Disc Sander (A)
1 Belt Sanding Table (B)
1 Disc Sanding Table (C)
1 Miter Gauge Assembly (D)
1 Workstop Assembly (E)
2 Lock Knobs (F)
1 Belt Tensioning Handle w/ Nut (G)
1 Table Lock Handle (H)
1 12-inch Abrasive Disc (I)
1 6 x 48-inch Abrasive Belt (J)
1 Operator’s Manual (not shown)
1 Warranty Card (not shown)
1 Hardware Bag (K), containing:
1 Hex Key, 6mm
4 Socket Hd Cap Screws, M10 x 80
1 Flat Washer, M10
8 Flat Washers, M10 x
∅
20
4 Lock Washers, M10
4 Hex Nuts, M10
Figure 8