Last updated 14/02/2014 Version 1.2
4 |
P a g e
Introduction
Congratulations on purchasing your Pressure Washer. We aim to provide quality tools at an
affordable price. We hope you will enjoy using this tool for many years. Your RX450 Portable
Washer has been designed for cars, bikes, boats and other outdoor equipment or garden
patios, green houses etc.
Assembly
You will need a standard screw driver.
1.
Insert cable hook hold into the machine (figure 1a)
2.
Align holes on the bottom of the pressure cleaner as shown and tighten the 2 screws
(figure 1b)
Figure 1a Figure 1b
Operation
Adjusting fan pattern
The angle of spray coming out of the lance may be adjusted
on some lances by rotating the nozzle. This will vary the
spray pattern from approximately a 0° narrow high impact
stream to a 60° wide fan spray (Figure2)
A narrow stream has high impact force on the cleaning
surface and results in maximum deep cleaning in a
concentrated area. However, this narrow high impact spray
must be used cautiously, as it may damage some surfaces
(figure 3)
A wide fan pattern will distribute the impact of the water over
a larger area, resulting in excellent cleaning action with a
reduced risk of surface damage, Large surface areas can be
cleaned more quickly using a wide fan pattern (figure 4)
Angle to the cleaning surface
When spraying water against a surface, maximum impact is
generated when the water strikes the surface “head on.”
However, this type of impact tends to cause dirt particles to
imbed in the surface, thereby preventing the desired cleaning
action.
The optimum angle for spraying water against a cleaning
surface if 45 degrees.
