Jet-tech X-33, Руководство пользователя

Страница: 7 / 16

Electrical
To get access to the electrical connections, the panels must
be removed.
To remove the panels:
Locate and unscrew the two Phillips screws on the top
panel. Slide panel toward the back and lift the panel. The
last two screws to remove are located on the back panel on
both side. Lift panel to remove.
7
Installation
This dishwasher must be installed on a level, rigid, non-
flammable surface
. Ensure that the machine is level by installing
the feet (shipped in the wash tank of the machine) and
adjusting them. Be sure to provide adequate space for
water, drain and electrical connections.
(i.e.:ceramic tiles, concrete, sheet
metal, etc)
The dishwasher must be connected with 120 volts 60Hz line.
The terminal block will receive L1, Neutral and Ground wire.
Unit must be well grounded. Breaker rating should be 15
amps.
Removing the panels