DAILY CLEANING & MAINTENANCE/ END OF WORK
1- In order to have excellent washing results and maintain a clean
wash tank, it is recommended to change the water of the machine at
least twice a day and clean all the filters inside the tank.
2- Filters must only be removed once all the water is drained out of
the machine. Any debris in the wash tank should be scooped out
and not flushed down the dishwasher drain.
3- The dishwasher should be turned off, drained and left empty
overnight or any time that the dishwasher will not be used for 2
hours or more. Allow 1/2 hour for the dishwasher to fill and heat
before the next anticipated use.
WATER DRAIN (ELECTRONIC MACHINE WITH DRAIN PUMP)
1-
Turn OFF the machine by pressing button “A” On/Off.
2- Open the door and remove the drain tube device.
3-
Hold button “G” drain water until "DRAIN" appears on the control panel. (Fig.13)
4- The dishwasher will drain, rinse the wash tank and drain again. It will turn OFF automatically after
completing this process.
FILTER CLEANING
1- T
urn OFF the machine by pressing button “A” On/Off.
2- Manually remove side or central filters or by unscrewing the
ferrule located on the top rounded filter inside the tank. (Fig.14)
3- Wash and rinse filters thoroughly under running fresh water.
4- Reposition all filters and components inside the machine.
EXTERNAL SURFACES CLEANING
Before carrying out any cleaning operations, turn off the power
at the breaker panel.
WARNING!
CLEAN STAINLESS STEEL SURFACES BY USING WARM SOAPY
WATER; NEVER USE BLEACH OR DETERGENT CONTAINING ABRASIVE
SUBSTANCES NOR STEEL SCRAPERS, COMMON WIRE WOOL,
BRUSHES OR SCRAPERS; RINSE THOROUGHLY USING A WET CLOTH
AND CAREFULLY WIPE DRY. DO NOT WASH THE APPLIANCE BY
USING DIRECT OR HIGH PRESSURE WATER JETS.
TURNING OFF THE MACHINE
1- Drain out completely the water from the tank.
2-
Turn OFF the machine by pressing button “A” On/Off. (Fig. 15)
3- Close the door and turn off the power at the breaker panel.
14
Fig. 12
Fig. 13
Fig. 14
Fig. 15
