Jet EQUIPMENT & TOOLS JTJ-2SV, Руководство пользователя

Страница: 3 / 11

3
WARNING
•
Read the entire contents of this manual before attempting to operate the toe jack.
•
This toe jack was designed and intended for use by properly trained personnel only. If you are not
familiar with the proper and safe use of a toe jack, do not use this jack until proper training and
knowledge have been obtained.
•
Use the jack on hard, level surfaces only. Never use the jack on a slope or soft surfaces.
•
Never load the toe jack beyond its rated capacity.
•
Support raised loads with appropriate supports. Never use the toe jack as a sole means of support.
•
Keep arms, legs, fingers, and toes clear of a lifted load at all times.
•
Do not add weight to a supported load.
•
Keep lifted loads as low as possible.
•
Remove the handle from the toe jack body when not in use. Never use any handle other than the
one designed for the toe jack.
•
Retract the ram completely when finished using the jack. An extended ram might get damaged.
•
Do not lower a load suddenly and stop in the middle of a lift. Damage to the jack may occur.
•
Replace the warning label on the jack if it is damaged or unreadable.
•
Failure to comply with all these warnings may cause serious injury and/or damage to property.
Specifications
Model Stock #
Toe
Capacity
(tons)
Head
Capacity
(tons)
Toe
Height
Min.
(in.)
Toe Lift
(in.)
Toe
Height
Max.
(in.)
Head
Height
Min.
(in.)
Head
Height
Max.
(in.)
Toe Size
(LxW/in.)
Base Size
(LxW/in.)
Net
Weight
(lbs.)
JTJ-2SV 453502 2 3 5/8 4-7/16 5-1/16 9-3/8 13-3/4 2 x 2 5 x 7 18
JTJ-5SV 453505 5 6 7/8 4-3/4 5-9/16 11-3/4 16-1/8 2-1/4 x 3 10-5/8 x 7-1/4 53
JTJ-10SV 453510 10 14 1-1/8 5-3/4 6-13/16 13-1/8 18-1/8 2-3/8 x 4 11-1/4 x 9-1/2 84
The specifications in this manual are given as general information and are not binding. JET Equipment
and Tools reserves the right to effect, at any time and without prior notice, changes or alterations to parts,
fittings, and accessory equipment deemed necessary for any reason whatsoever.