JESS WELDING ProTIG 350AC/DC, Руководство по эксплуатации

Страница: 29 / 52

ProTIG 350 AC/DC
Operating manual Page 25
17. Technical data
Power source ProTIG 350 DC ProTIG 350 AC
Supply voltage, 50/60 Hz 350V to 480V, 3 Phases 350V to 480V, 3 Phases
Mains fuse 16A 16A
Max. power draw 13,5 kVA, Imax = 19A, Ieff = 12A 13,5 kVA, Imax = 19A, Ieff = 12A
Kind of current DC AC
TIG Electrode TIG Electrode
Set-point range Stepless 5- 350A 5- 320A 5- 350A 5- 320A
Operating voltage 10- 24V 20 – 32,8V 10- 24V 20 – 32,8V
Open circuit voltage
13 V (reduced)
(max. 77V)
13 V (reduced)
(max. 77V)
13 V (reduced)
(max. 95V)
13 V (reduced)
(max. 77V)
Duty cycle 40 % (40°C) 350A/ 24V 320A/ 32,8V 350A/ 24V 320A/ 32,8V
Duty cycle 60 % (40°C) 320A/ 22,8V 290A/ 31,6V 310A/ 22,4V 290A/ 31,6V
Duty cycle 100 % (40°C) 280A/ 21,2V 260A/ 30,4V 270A/ 21V 260A/ 30,4V
System of protection IP 23 IP 23
Insulation class F F
System of cooling F F
Weight power source solo 33 kg 38 kg
Weight FG10/KG10 solo 62 kg 62 kg
Weight complete 95 kg 100 kg
Dimensions L x B x H (mm)
complete
1030 x 540 x 1000 1030 x 540 x 1000
Authorised for welding under increased electrical hazard
Manufactured in accordance with European Standards EN 60 974-1 and EN 60 974-10
Cooling unit KG 10
Supply voltage, 50/60 Hz 400V, 1 Phase
Mains fuse 16A
Max. power draw 300 VA
Power pump maximum 9l/min, 3,2 bar
Cooling power 1,1kW
System of protection IP 23
Tank 8,5l
Manufactured in accordance with EN60974-2
Generator operation:
The generator must have 30% more power as the welding unit.
Example: 13,5kVA (unit) + 30% = 18kVA. The generator for this unit must have 18kVA.
A generator with less power will damage the Jäckle & Ess System GmbH welding unit as well as the
generator himself and is disallowed.