D. Setting Up 2.4GHz wireless AV Link
To enjoy wireless video and audio, just connect the transmitter to
whatever audio/video source you want to enjoy from another location,
and connect the receiver to the TV, monitor or powered speakers in
that other location.
A/V link system is suggested to connect to following A/V equipment use:
Video sources
：
Audio sources
：
i
VCR
i
Compact Disk player or Changer
i
Cable set-top box (with A/V output)
i
Stereo Receiver
i
Satellite Receiver
i
Cassette Deck
i
Laser Disc Player
i
Camcorder or Miniature CCD Camera
i
Digital decoder
i
DVD
7
Make sure the ON/OFF switch is in the
c
c
c
c
OFF
f
f
f
f
position before connection.
■
■
■
■
How To Transmit Audio/Video from Your VCR
1.
Connect one set of audio/video (A/V) cables (RCA or SCART cable labeled “Sender”)
to the A/V jack of the transmitter and to the A/V output jacks (RCA or SCART
connector) on the back of your VCR. Be sure the yellow, red and white plugs match the
yellow, red and white jacks on both the VCR and the transmitter. If the VCR has only
one output for audio (mono sound only), connect the white plug to that single audio
output and to transmitter's AUDIO LEFT jack.
2.
Plug one end of the power adapter into the back of the transmitter and the other end into
any 230-volt wall outlet (or 120-volt),DC in jack 12V/300mA. Use only the adapter
provided.
3.
Locate and orient the transmitter according to the section of this manual titled
"
Orienting Units for Optimum Performance
"
for best performance of transmitter.
Units for Optimum Performance for best performance of transmitter.
8
