INSTALLATION INSTRUCTIONS
DL-FLEX2-TILE
Instruction sheet subject to
change without prior notice
Rev 59
3/12/2020
Page 1 of 6
IMPORTANT SAFETY INSTRUCTIONS
Please read carefully before using product. Protect yourself and others by observing all safety information, warnings and
cautions. Failure to comply with instructions could result in personal injury and/or damage to product or property.
Please retain instruction sheet for future reference.
When installing or using this product, basic safety precautions should always be followed including the following:
1.
Read all instructions before attempting to install this product.
2.
Ensure main power is off before installing or wiring this product.
3.
Ensure correct voltage is being used for this product.
4.
Do not use if there is visible damage to the fixture or cord insulation. Inspect periodically.
5.
Do not install in direct sunlight to avoid damaging the phosphor on the LEDs.
6.
Do not submerge in any liquid or use the product where liquid might pool.
7.
Disconnect electrical power before adding to or changing the configuration of this product.
8.
Fixtures must be installed by a qualified/certified electrician in accordance with all national and local electrical and
construction codes and regulations.
CAUTIONS
