Jesco C 2213, Инструкция по эксплуатации и техническому обслуживанию

Страница: 38 / 44

38
| Operation Manual C 2213 | CE declaration of conformity
13 Maintenance kits
Contents Part.-No.
Maintenance kit vacuum regulator
C 2213 without intake valve 1 diaphragm, 2 O-rings, 1 screw 35039
Maintenance kit inlet valve 1 filter, 4 O-rings, 2 valve seats, 2 balls,
14 screws, 2 springs, 6 washers Standard:
38619
Increased residual
pressure:
38924
Cylinder connector gasket 1’’ (BSW 1’’ gem. DIN 477) 81834
G 5/8 (gem. BS 341) 81832
G 3/4 (gem. AS2473) 81833
1.030“-14NGO (gem. CGA V-1 / 660) 81836
Yoke (gem. CGA V-1 / 820) 81837
Manometer Standard 24087596
1x MAX close contact 24087597
1x MIN close contact 24087598
Maintenance kit for safety blow-off valve 1 diaphragm, 1 valve seat 33390
Maintenance kit for back stop 2 O-rings, 1 ball, 1 spring 35062
Spare filling for activated-carbon filter activated carbon 35057
Maintenance kit for flow meter 5 O-rings 29717
Tab.: 7: Servicing kits
14 Unit revision
This operation manual applies to following units:
Unit Revision
C 2213 04.2010
It contains all the technical information required for installation, start-up and maintenance. Should you have any
questions or require further informations regarding these operating instructions, please contact the manufac-
turer or its official national representative.