The Clark Reliance Corporation
16633 Foltz Industrial Parkway | Strongsville, OH 44149 | Tel1 (440) 572-1500 Facsimile: +1 (440)-238-8828
Email:
| Web Site:
www.clark-reliance.com
Specialists in Liquid Level Indication
1. INTRODUCTION
The Jerguson Model MTII4200 is a 4-20 mA, loop-powered HART compatible level transmitter intended to be used in
conjunction with the Jerguson Magnicator II magnetic liquid level gage.
The part number designator for the MTII4200 can be found below.
MTII4200-#-#-#-#-#-#-###/###
COMM OPTION:
H=4-20mA w/ HART
HOUSING:
A= ALUMINUM w/ WINDOW (STD.)
S= STAINLESS STEEL w/ WINDOW
BA= ALUMINUM w/o WINDOW
TRANSMITTER ORIENTATION:
A= TOP LEFT HAND (STD.)
B= TOP RIGHT HAND
C= BOTTOM RIGHT HAND
D= BOTTOM LEFT HAND
ALARM SETTING:
L= 3.85 mA (DEFAULT)
H= 22.5 mA
MAX SENSING LENGTH
IN INCHES, ON 6 INCH INCREMENTS
LCD DISPLAY:
M= mA OUTPUT (DEFAULT)
I= INCHES
P= PERCENTAGE
ACTIVE SENSING LENGTH
IN INCHES
MOUNTING STYLE:
S= STRAIGHT (STD.)
H= HIGH TEMP EXTENDED
There are two main components that make up the MTII4200. These two components are the electronics housing and the
sensor housing (see Figs. 1 & 2). These two components are assembled at the factory and should not be separated in
the field.
Figure 1. MTII4200-H-A-D-x-x-S-xxx/xxx Straight Bottom Left Hand Assembly
MAX ACTIVE SENSING LENGTH
(3.500)
DETERMINED BY SE
POSITION AT ASSEMBLY
FOR V19961-E1= 9.313 (REF.)
FOR V20816-E6 & V21037-T= 8.688 (REF.)
Section:
M500
Bulletin:
M500.31
Date: 01-26-12
Supersedes: 04-22-08
MTII4200 level Transmitter
Installation, Operation &
Maintenance Instructions
