- 3 -
[1]
SPECIFICATIONS OF MAGNETIC DRILLING MACHINE
[MODEL Magpro40/ 1S Adjust Swivel, Reference: 490140S]
Maximum hole cutting capacity in .2/.3C steel =
4
0mm dia. x 50mm depth
Motor Unit
Voltages
220/240V(100/110V), 50/60Hz
Rated output
1,100 W
Magnet Size
155 x 78 x 45 mm
Magnet Force at 20°C with
20 mm minimum plate thickness
The use on any material less than 20mm thick
will progressively reduce the magnetic
performance. If possible, substitute material
should be positioned under the magnet and
work piece to equate to a suitable material
thickness. If this is not possible, an alternative
secure method of restraining the machine
MUST be used.
420kgf at drilling point
Overall Dimensions
Height - maximum extended
540mm
Height - minimum
340mm
Width (including Hand wheel)
190mm
Length Overall (including Guard)
230mm
Stroke
150(200)mm
RPM ( No LOAD )
450
Net Weight
12.0kg
Maximum hand/arm vibration magnitude
(measured at handle during operation in
accordance with ISO5349, using a 22mm
cutter through 13mm MS plate)
0.82 m/s²
Average noise level during cutting at
operators ear position.
90dB(A)
