Section 2
Installation
2.1 Unpacking
Remove the Model 3505 from the packaging and ensure the following items are included:
1.
Model 3505 pH/mV/Temperature meter
2.
Epoxy bodied combination pH electrode (924 001)
3.
ATC probe (027 500)
4.
Electrode holder
5.
4, 7 and 10pH buffer sachets
6.
BNC shorting plug (009 146)
7.
Battery (PP3)
8.
Condensed operating instructions (350 551)
9.
Instruction manual (350 550)
Any shortages or damage should be reported immediately to the Manufacturer or your local
Distributor.
2.2 Installation
350 550/REV A/03-03
2
The Model 3505 is supplied ready to use. Connect the ATC (if required) and the pH electrode to the
rear panel Temp and pH sockets.
The electrode stand requires minimal assembly (refer to the diagram below).
Fig. 2.2.1 - Electrode Holder Assembly
4
1
2
3
