1
2
VX3012
Mute
Press the volume knob on the front panel or press the [MUTE] Button on the
remote control to mute the volume from the unit.
Volume Adjustment
Volume Increase/Decrease
To increase or decrease the volume level, turn the rotary encoder on the front
panel. When the volume level reaches "0" or "50", a beep sounds, indicating that
the adjustment limit has been reached. The TFT screen displays the volume level
for 3 seconds.
Audible Beep Confirmation
An audible beep tone confi
r
ms each function selection. The beep tone can be
disabled through the Setup menu.
Using the TFT Monitor
Open / Close Monitor
Press the [OPEN] Button on the front panel or remote control to open or close
the TFT display panel.
NOTE:
Never pull or push on the TFT display panel.
Change the Monitor Tilt Angle
Due to the inherent character of an LCD, you will get different vision
impressions when you
view
it from different angles. The display angle of
this unit can be changed; hence you can select the best angle where you
can get the best vision impression. Press and hold the [OPEN]
b
utton
(>1
second)
to enter TFT Angle Setting Mode, and rotate the volume knob to adjust.
Press and hold the [OPEN] button again to exit the TFT Angle Setting or let the
feature time out after 5 seconds.
NOTE: Never pull or push on the TFT display panel.
[RESET] Button
Resetting the System
Soft Reset
-
To correct a system halt or other illegal operation, use the tip of a pen
to press and release the Reset Button located just below the front panel rotary
encoder (volume) knob.
Figure 5. System Reset Button
For a Hard Reset - Go to "Settings" > DVD tab > Load Factory > Reset. After a "System
Reset", the unit will restore all default settings.
Downloaded from
www.Manualslib.com
manuals search engine
