8
5. To reject an income-call, simply press and hold the Bluetooth button on the
SMPS-650 for about 2 seconds, a long beep sound will be heard.
6. When answering an incoming call with the SMPS-650, you can switch between
using your cell phone or switch back to using the SMPS-650 for your call.
1). Press and hold the Bluetooth button for 2 seconds, it will switch from
SMPS-650 to your cell-phone to answer the call.
2). Press and hold the Bluetooth button again for two seconds, it will switch back
from your cell-phone to SMPS-650 to answer the call.
Note
: 1. If you press and hold the Bluetooth button for about 3 seconds, it will turn off
the Bluetooth of the SMPS-650.
2. If SMPS-650 Bluetooth is left idle for about 10 minutes without linking to any
Bluetooth enabled device, it will automatically turn off to save battery power.
Redialing the last number with the SMPS-650
The SMPS-650 will automatically redial the last number you dialed by tapping the
SMPS-650 Bluetooth button twice.
Hang up with the SMPS-650
A quick press on the Bluetooth button will end the call in progress. A short beep tone
will be heard from the SMPS-650 confirming the call ended.
Re-linking to the cell phone
If your cell phone is already paired with the SMPS-650, but became unlinked even
with both Bluetooth devices turned on. You can re-link them by:
1. Turn off the SMPS-650 Bluetooth and turn it on again to re-link your cell phone.
The red Bluetooth button status indicator will blink two times with two short beeps
if the SMPS-650 and your cell phone have been re-linked successfully.
2. You can also re-link the SMPS-650 by using Bluetooth operation of your cell
phone. Please refer to operation manual of your cell phone for more information.
PLAYING MUSIC USING THE AUXILIARY INPUT
The SMPS-650 features an auxiliary audio signal input jack for connecting external
a
udio devices like MP3 players, CD players, iPhones or iPods (except iPod shuffle 3
rd
gen) and listen to them your through the speakers of the SMPS-650.
1. Use the audio cable
(included)
with one 3.5 mm stereo plug on each end of the
cable.
2. Plug one end into the AUX-IN jack on the SMPS-650 and the other end of the
cable into the Line-out Jack or Headphone Jack of your external audio device.
