7
PAIRING (LINKING) A BLUETOOTH ENABLED CELL PHONE OR OTHER
BLUETOOTH ENABLED DEVICE TO THE SMPS-650
1. With the power on and Bluetooth Off , press and hold the Bluetooth button for
about 7 seconds until a second beep sound is heard, The Bluetooth button
backlight will flash blue and red. The SMPS-650 is ready to pair (link) with your
Bluetooth device.
2. Turn on the Bluetooth feature of your cell phone and enable the search or scan
feature to find the SMPS-650.
3. Select "SMPS-650" from the device list when it appears on your screen. If
required, enter the pass code “0000” to pair (link) the SMPS-650 with your cell
phone.
4. After successfully pairing (linking) your cell phone with the SMPS-650, you can
play music from your cell phone wirelessly to the SMPS-650.
5. Press the Volume Up (+) / Down (-) button
to adjust the desired volume level.
6. To turn off the SMPS-650 Bluetooth, press and hold the Bluetooth button for
about 3 seconds until a beep sound is heard and the Bluetooth button backlight
flashes red and then all lights go off. Don’t forget to also turn off the Bluetooth
feature on your cell phone.
Notes:
1. Refer to manual of your cell phones, iPad, computer or other Bluetooth
enabled device for Bluetooth operation, since it may vary from model to model.
2. Your Bluetooth enabled device will not play the music through the speaker,
even it can be connected, if the device does not support A2DP.
3. Do not plug in the Audio jack when the Bluetooth is in operation.
4. If you are pairing (linking) your computer to the SMPS-650 using Bluetooth,
you may need to set the SMPS-650 as your computer’s default sound device.
Using the SMPS-650 as a Hands Free Bluetooth Speakerphone
1. Link your cell phone to the speaker via Bluetooth as described above.
2. When receiving an incoming call on your cell phone, tap the Bluetooth button on
the SMPS-650 to switch an incoming call from cell phone to the SMPS-650. A
short
beep sound will be heard confirming the call was answered. Complete your
call using the built-in microphone and speaker of the SMPS-650.
3. Press the VOLUME UP(+) /DOWN (-) button on the SMPS-650 to adjust the
volume to your desired sound level.
4. To end the call, just tap the Bluetooth button again on the SMPS-650. A short
beep sound will be heard and the call will end. If you were streaming music from
your cell phone to the SMPS-650, the music will automatically resume streaming
to the SMPS-650.
