![background image](http://html1.mh-extra.com/html/jensen/rainswitch/rainswitch_upgrade-instructions_3802490002.webp)
2
10/25/2018
643 SO. DUGGAN AVENUE • AZUSA, CALIFORNIA 91702-5185
(626) 969-
7991 • (661) 324-3378 • FAX (626) 969-4991
Installation:
1. Turn
OFF
all power to the pilot station.
2. Remove the relay in the pilot station.
3.
Remove the 30mm “GREEN” level sensor on the rainswitch.
4. Install the replacement probe, using the 30mm x
½” MNPT adaptor. No
sealing tape or compound is necessary as a watertight connection is not
necessary.
5. Install the level controller in the pilot station if there is room. You may find
it easier to install the controller in another enclosure and wire it to the
existing pilot station as this controller is larger than the relay you have
removed.
6. Wire the controller per the appropriate wiring schematic.
Dwg# JICAT1PB2L-C for JIC-AT1PB2L-A Automatic Pilot Stations
Dwg# JIC1PB2L-C for JIC-1PB2L-A Manual Pilot Stations
Continuity check all connections to confirm correct wiring prior to
repowering the pilot station.
7. The drawings and manual are available for download from
Conclusion:
You will now have a vastly improved operating rain diversion system, with
far less maintenance problems.