E-9
TIPS FOR BEST RADIO RECEPTION
AM - The AM antenna is built inside the radio. If AM reception is weak, change the
position of the unit until the internal antenna picks up the strongest signal.
FM - If FM reception is weak, fully extend the wire antenna and vary the position and
location of the antenna until you find the strongest signal.
AUX-IN OPERATION
You can play other music sources (iPod, MP3 or other digital audio players) through
the speakers of
the
QiCR-200 by connecting the AUX-IN JACK (#22) to your external
player’s audio out jack or headphone jack.
1. Plug one end of an audio cable (not included) into the AUX IN JACK (#22) and the
other end of the cable to the headphone jack of your digital audio player
.
2.
Tap
/ MODE BUTTON (#9) repeatedly to select AUX mode
.
3.
AUX will show on the LED Display.
4.
Turn on and s
tart playing the external device you plugged into the AUX IN JACK
(#22).
5. Slowly adjust both the volume controls of your QiCR-200 and the external device
until you reach a comfortable listening level.
Notes:
•
If you connect
the
QiCR-200 to the Line-Out Jack on your external device, you
only need to adjust the volume control of your QiCR-200. If you connect to the
Headphone Jack of your external device, you may need to adjust both the
volume controls of your external device and
the
QiCR-200 to obtain the desirable
listening level.
•
Remember to turn off the QiCR-200 when you have finished listening. Don't
forget to switch off the power of your external audio device as well.
SLEEP OPERATION
The sleep timer turns off the unit automatically after a designated time has elapsed.
1. Tap the SLEEP BUTTON (#6) to enter sleep mode.
2. Repeatedly tap the SLEEP BUTTON (#6) to select the sleep timer 120 – 90 – 80
- 70 – 60 – 50 - 40 – 30 – 20 – 10 – 5 - OFF (in minutes). The unit will play for
the selected length of time then turn off automatically.
3. To cancel the sleep timer, repeatedly tap the SLEEP BUTTON (#6) until the
timer shows OFF.
4. To turn the unit “Off” before the selected length of time, press and hold the /
MODE BUTTON (#9) at any time.
Note:
Tap the SLEEP BUTTON (#6) once to check the remaining sleep time.
DIMMER OPERATION
Tap the DIMMER BUTTON (#4) repeatedly to select the brightness settings of the
display (High, Medium or Low).
