![Jensen MCR-500 Скачать руководство пользователя страница 8](http://html1.mh-extra.com/html/jensen/mcr-500/mcr-500_user-manual_3780848008.webp)
E-7
POWER SOURCES
This unit operates on 120V~ 60Hz or 6 x DC1.5V “C” (UM-2) batteries. Do not attempt to
operate the unit on any other power source. You could cause damage to the unit and
void your warranty. Please be sure the power outlet you plug this unit into is working and
receives constant (unswitched) power.
AC OPERATION
Plug the detachable AC cord into a standard AC outlet (120V~60Hz).
1.
When the AC power cord (included) is connected to the AC POWER JACK (#19) on
the back of the unit and the other end is plugged into a 120V AC~ 60Hz wall outlet, the
unit will disconnect the batteries automatically, and operate on AC Power only.
2.
Slide the FUNCTION SELECTOR (#2) to “OFF/TAPE” for cassette recorder play or
unit power off, “AUX” position AUX play, “FM” for FM radio and “AM” for AM radio.
WARNING:
Before connecting to the power outlet, ensure that the outlet corresponds to the
information on the rating label at the bottom of the apparatus.
BATTERY OPERATION
1.
Remove the BATTERY DOOR (#18) on the back of the unit.
2.
Install 6 x DC1.5V “C” (UM - 2) batteries (not included) according to the polarity
diagram inside the battery compartment.
3.
Close the BATTERY DOOR (#18).
IMPORTANT:
Be sure that the batteries are installed correctly. Wrong polarity may damage
the unit and void the warranty.
BATTERY NOTE AND CARE
1. Danger of explosion if the battery is replaced incorrectly. Replace only with the same or
equivalent type
2. Do not mix old and new batteries.
3. Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
4. If the unit is not to be used for an extended period of time, remove the batteries. Old or
leaking batteries can cause damage to the unit and may void the warranty.
5. Do not try to recharge batteries not intended to be recharged; they can overheat and
rupture. (Follow battery manufacturer’s directions).
6. Do not dispose of batteries in fire, batteries may leak or explode.
BATTERY REPLACEMENT
When the output sound of this unit becomes distorted, the batteries are weak. You need to
replace all the exhausted batteries at the same time as soon as possible to avoid battery
leakage.
Содержание MCR-500
Страница 6: ...E 5 LOCATION OF CONTROLS ...