E-9
AUX IN OPERATION
This unit provides an AUX IN JACK (#12) for connecting external audio devices like MP3
players, CD players, smart phones and iPods (except iPod shuffle 3rd generation) to listen to
your external source through the speakers of this system.
1. You need an audio cable (not included) with one 3.5 mm stereo plug on each end of the
cable.
2. Plug one end of the cable into the AUX IN JACK (#12) located on the top of the unit and
the other end of the cable into the Line-out Jack or Headphone Jack of your external
audio device.
3. Turn on the external audio device.
4. Turn on the unit by setting the FUNCTION SELECTOR (#2) to AUX position, POWER
INDICATOR (#11) turns on.
5. The volume level can now be controlled through the VOLUME CONTROL (#1) of the unit.
Operate all other functions on the auxiliary device as usual.
6. Set the FUNCTION SELECTOR (#29) to OFF/TAPE position to turn off the unit.
Notes:
•
If you connected the Line-out Jack on your external device then you only need to adjust
the volume control of this system. If you connected the Headphone Jack of your external
device then you may need to adjust both the volume control of your external device and
the volume control of this system to find the most desirable volume setting.
•
Remove the audio cable from AUX IN JACK (#25) when you finish listening. Don't forget
to switch off the power on your external device as well.
USING HEADPHONES (NOT INCLUDED)
Inserting the plug of your headphones into the HEADPHONE JACK (#3) will enable you to
listen to the CD, Radio or Cassette music in private. When using headphones, the Built-in
Speakers will be disconnected.
CAUTION:
•
Avoid excessive volume levels for long period of time when using the earphones.
Prolonged use at high levels may impair your hearing.
•
Keep the volume at a reasonable level even if your headset is an open-air type designed
to allow you to hear outside sounds. Please note that excessively high volume may still
block outside sounds.
Содержание MCR-500
Страница 6: ...E 5 LOCATION OF CONTROLS ...