11
®
KDC 9520
Press INTRO to play first ten seconds
of each track on current CD. SCN
appears in the display. Press again to
stop intro and listen to track.
Intro (Preview all Tracks)
Repeat the Same Track
Press RPT to continuously repeat
same track. RPT appears in the
display. Press again to stop repeat.
Random (Play all Tracks)
Press RDM to play all tracks
on CD in random order one time.
Press again to stop random play.
Note:
• Driving on bumpy roads may cause
CD player to skip, especially when KDC
9520 is new. A short break-in period will
improve performance. Skipping does
not damage CDs in any way.
• Moisture and high humidity can cause
malfunction of CD player. Turn on
vehicle heater and allow moisture to
evaporate before use.
• Do not expose CD player to extremely
high or low temperatures.
• Do not drive with ejected CD in the slot.
INTRO
1
RPT
2
RDM
4
Use Program function to select up to
24 CD tracks to play in any order.
Program works by allowing you to
select a track number for each spot
in the playing sequence. A CD must
be inserted to use Program.
Program CD Tracks
1. Press or to choose track number.
2. Press MEM/CLR to enter
track number into
memory. Display shows
next track number in
sequence. Continue (up
to 24 times) for all desired
tracks.
3. Press PGM/AMS to play
CD in programmed order.
PGM
AMS
5
MEM
CLR
6
PGM
AMS
5
1
2
3
or
VOL
VOL
VOL
VOL
Repeat Selection (RPT A-B)
The Repeat A-B function allows you to
continuously repeat a selection of music.
RPT
A-B
3
RPT
A-B
3
1
2
RPT
RPT
1. Press RPT A-B to set the
beginning point (A).
2. Press RPT A-B again to set
the end point (b).
The chosen selection of music will repeat over
and over until RPT A-B is pressed again.
KDC9520_EOP.p65
3/14/00, 1:57 PM
11