Jensen JWM45, Инструкция по установке и эксплуатации

Страница: 7 / 25

BASIC OPERATION
Power
Volume Control
Audio Menu Setting
Loudness
Pause/Mute
Liquid Crystal Display (LCD)
System menu setting
Press the POWER button (16) turn the unit on or enter standby mode. The unit
will resume at the last mode (Tuner, Aux, etc.) after turn on.
Press and Hold the AUDIO button (22) to toggle the loudness function on/off.
This function will time out after five seconds of inactivity and the unit will
resume normal operation.
Press the button (3) to silence the audio output in tuner, CD, DVD, BT, USB, ARC
or auxiliary input mode. Press again to restore the previous volume level.
The liquid crystal display (LCD) panel (20) displays the frequency, time and activated
functions.
Press the
BRIGHT UP button (34) to increase the LCD brightness and press the
BRIGHT DOWN button (32) to decrease the LCD brightness from “LEVEL 0” (off) to
“LEVEL 8” (brightest)
1. Press the SETTINGS button (23) to enter the system menu.
2. Press SETTINGS button or press the |<< or >>| ( 2,5) to choose the following
system menu list.
3. Once the desired menu item appears on the display, adjust that option by rotating
the volume encoder knob clockwise or counter-clockwise within 5 seconds.
4. Press the
ENTER button (4) to confirm your selection and exit system menu. The
unit will automatically exit the system menu after 5 seconds of inactivity.
Rotate the VOL encoder knob control clockwise to increase or counter-
clockwise to decrease the volume output.
The maximum volume setting is “40”. While adjusting the volume, the LCD
displays numerical representation of the level.
Press the AUDIO button (22) to step through the following audio adjustment
options.
Rotate the
VOL/ENTER encoder knob control to adjust the selected audio
feature.
Ÿ
The following audio menu items can be adjusted:
Ÿ
BAS: Adjust the Bass level from "-7" to "+7".
Ÿ
TRE: Adjust the treble from "-7" to "+7".
Ÿ
BAL: Adjust the speaker output balance between "L7" (left) and "R7" (right).
Ÿ
“BAL 0" indicates an equal balance between the left and right speakers.
Ÿ
FAD: Adjust the speaker fade between “R7” (rear) and “F7” (front). “FAD 0”
indicates and equal balance between the rear and front speakers.
Ÿ LOUDNESS: Toggle the loudness on/off. When listening to music at low
volumes, this feature will boost the bass/treble range to compensate for the
characteristics of human hearing.
7
JWM
45
2 3 5 6 7 8 9 10 11 12 13 14
18
19
20
1
15
16
17
21 22 23 24 25 26 27 28 30 32 29 31 33 34 35 37 36
4
NOTE: When subjected to cold temperatures for an extended period of time,
LCD panels will take longer to illuminate and the display visibility may slightly
decrease. Optimal LCD operation will return to normal when the temperature
increases to a normal range.