background image

 

18

BASS BOOST 

Press down the “BASS BOOST” button on the main unit if you want to enhance the bass 
when listening to the system. Press the button again to turn off bass boost effect. 

 

MUTE FUNCTION 

- Press the 

MUTE

 button on remote control to mute the sound output from speaker temporarily, no 

sound “NO SND” indicator will appear on display. 

- Press the

 MUTE

 button again to resume to normal speaker playback. 

 

LINE OUT CONNECTION 

You can connect this unit to an external Hi-Fi / AMPLIFIER system by connecting the 
LINE OUT socket to the auxiliary input socket of your Hi-Fi / AMPLIFIER system with 
RCA cables (not included). 

Note: 

The Volume control on the main unit will not adjust the volume when using the LINE OUT. 

 

3.5MM STEREO HEADPHONE JACK 

The stereo headphone jack is located on the left front panel. Plug a set of stereo 
headphones (not included) into this jack for private listening without disturbing others. The 
speakers are automatically disconnected when headphones are connected to the jack. 

 
IMPORTANT:

 When using headphones, always set the volume control to a low level 

before you put the headphone on. Then put the headphone on and gradually increase the 
volume to a comfortable listening level. 
 

AUXILIARY INPUT 

This unit provides an auxiliary audio signal input jack for connecting external a

udio devices like 

MP3 players, CD players and older, non-dockable iPods (except iPod shuffle 3

rd

 gen) so you can 

listen to your external source through the speakers of this system. 

1. Use an audio cable (not included) with one 3.5 mm stereo plug on each end of the cable. 

2. Plug one end into the Aux-in jack on the main unit and the other end of the cable into the 

Line-out Jack or Headphone Jack of your external audio device. 

3. Turn on the external audio device. 

4. To select auxiliary audio input, press the “

CD 1/

AUX” button on unit front panel to select “AUX 

IN” mode. 

5. The volume level can now be controlled through the main unit. Operate all other functions on the 

auxiliary device as usual. 

Note: 

(1) If the Line Out Jack of your external device is connected, then you only need to adjust the 

volume control of this system. If the Headphone Jack of your external device is connected, then 

you may need to adjust both the volume control of your external device and the volume control 

of this system to find the most desirable volume setting.   

(2) Slide the MODE SWITCH to turn off the system when you finish listening. Don't forget to switch 

off the power on your external device as well. 

 
 
 
 
 

Содержание JTA-980

























Отзывы: