E6
LOCATION OF CONTROLS
1. 3.5mm Headphone Jack
2. 3.5mm AUX-IN jack
3. Power LED Indicator
4. Power On/Off / Volume Control Knob
5. Anti Shock Lock Down Screw
6. 45 RPM Record Adaptor
7. 33/45/78RPM Speed Selector
8. Auto Stop Switch
9. Tone Arm Rest/Holder
10. Pitch Adjust
11. USB Port For Computer Connection
12. Speaker Out RCA Jacks (L/R)
13. AC Power Cord
CAUTION
:
This unit should not be adjusted or repaired by anyone except qualified service
personnel.
ANTI-SHOCK LOCK DOWN SCREW
IMPORTANT:
This turntable features a built in Anti-Shock system, and the turntable is
locked down when shipped from the factory. Rotate the ANTI-SHOCK LOCK DOWN
SCREW, in a clockwise direction to release the turntable and activate the anti-shock
feature before using the turntable.
STEREO PHONOGRAPH OPERATION
Please Note - Before Use
-
Remove the stylus protector.
-
Make sure that the tone arm is unlocked and free
to move from the tone arm rest prior to operating.
Lock the tone arm in place again when not in use.
1. Switch the system on by turning the POWER
On/Off / VOLUME Control Knob in a clockwise direction. A “Click” sound will be heard
and the red Power LED Indicator lights up.
2. Raise the turntable dust cover.
3. Place a record on the turntable platter (use the 45 RPM record
adaptor if you are
playing 45 RPM records).
4. Set the speed selector to the proper position for the record you are playing.
Cartridge
Stylus assembly
